Skip to main content

FMI Consulting

Resources › GPS clock-in by industry
Guide · GPS clock-in

GPS clock-in by industry: when knowing where your people are really matters

Four reasons to check location at clock-in, and how they play out in cleaning, construction, field service and more

GPS clock-in does not measure working hours. It places a person at a work site at the moment they clock in. Whether that matters depends on your industry: for some it is proof of service, for others it is about safety or billing.

Four questions a location check can answer

Each industry cares about a different one. The last has nothing to do with GPS.

Presence

Where is the person?

The person started work at the right site, and not somewhere else. This is the most common reason for a location check.

Safety

Who is exposed to a risk, and where?

If something happens, the company knows at which site someone started the day, and who else was there.

Proof of service

Can we show the service was done?

A client, a contract or a public body asks for evidence that the work took place at the agreed address.

Not a GPS question

How many hours were worked?

Hours come from the contract, the shift and the recorded clock-in times. A position on a map says nothing about the work done during the shift.

Industry by industry

Why the location of a clock-in matters, and what it is used for.

Proof of service · Safety

Cleaning and facility services

A team often visits several client sites in a shift, and the contract covers a mix of tasks across the shift, so hours are not counted from the position. The location check shows the client where the team started work, and tells the company who started at which site, including early or night shifts worked alone.

Software for cleaning →
Safety · Site presence

Construction and site work

On a site with several companies, whoever coordinates safety needs to know who is there: for an evacuation, for coordination between contractors, and to check that the people on site are the ones expected. A location-checked clock-in ties each presence to the site.

Billing · Service levels

Installation and maintenance

The visit is what the customer pays for. A location check confirms the technician was at the customer’s address, which supports invoicing per call-out and service-level reports. Technicians often work alone on equipment that can be dangerous.

Installation & maintenance →
Proof of service

Security services

The client wants proof that every post was covered. A location-checked clock-in at the start of a shift confirms who was at which site. Rounds between checkpoints need a different tool, such as tags that are scanned along the route.

Visit record · Safety

Home care and health services

Visits happen in private homes, usually with one worker. The organisation, and sometimes the body that funds the care, may need a record that the visit took place at the right address. For the worker, someone knows where the day started.

Safety

Agriculture and forestry

Teams work far from the office, with machinery or in extreme heat, where coverage can be poor. Knowing where each team started the day matters in an emergency. Because the signal can fail, a plain clock-in must always remain available.

Proof of service · Safety

Public and municipal services

Green spaces, waste collection and street maintenance are often contracted by area or route, and the contractor shows that work began where agreed. Crews on the road are exposed to traffic, so presence at the start of the shift also matters for safety.

Billing

Staffing, events and handling

The same person may work for several clients in a week. A location check shows at which client’s site the work began, which supports invoicing the right client.

Event production →

Your industry is not in the list? See all the sectors we support in Solution by Industry.

How GPS clock-in works in PlanningConnect

A single check at the moment of clock-in, and no tracking during the day.

Step 1

The company sets a radius

A radius in metres around the client’s address is set for the whole company account. The GPS button appears only when an activity is selected and its client has an address in PlanningPME.

Step 2

The person clocks in with GPS

The app reads the position only when the person presses the button, and the browser asks for permission the first time. The server compares the position with the client’s address.

Step 3

Inside the radius, it is recorded

The clock-in is saved with a GPS icon at the moment of the press, and its time cannot be edited. Outside the radius nothing is recorded, and the app shows how far away the person is.

The normal clock-in button is still there. A person who is at the client’s premises but outside the radius, or who cannot get a position, can clock in the usual way, and the clock-in is saved without the GPS icon. Read how it fits together in job and time management.

Safety: what a location check does, and what it does not

It tells you where a shift started. It does not tell you where someone is now.

What it does

At the start of the shift it records who is at which site. In an emergency, an evacuation or a site audit, that record answers the first question: who should be here?

What it does not do

It does not show where a person is now, and it does not raise an alarm. For people who work alone, the risk assessment may call for other devices, such as a man-down alarm or a regular check-in by phone.

In Italy, the employer must assess the risks of every working condition, including people who work alone (Legislative Decree 81/2008). A location-checked clock-in is one input to that assessment, not a replacement for it. GPS also works poorly indoors, underground and in confined spaces, where presence is better recorded at the entrance with other means.

Privacy and labour law: a single check is not tracking

Checking a position once, when a person decides to clock in, is different from following them during the day. The first is a presence record, and the second is a monitoring tool. In Italy, the rules on remote monitoring (Article 4 of the Workers’ Statute) and on data protection (GDPR) treat the two differently, and what applies to you depends on how the tool is used.

Good practice is to tell employees clearly what is checked and why, to check only what you need, and to agree the approach with your labour consultant, union representatives where applicable, or your data protection officer before you switch it on. This page is general information and not legal advice.

Three questions before you switch it on

The answers decide whether GPS clock-in is the right tool, and how to set it.

Question 1

What is it for?

Proof of service, safety or billing. If the answer is to count hours, GPS is the wrong tool.

Question 2

Who needs the record?

The client, the safety manager, the finance team, or nobody outside the company. That decides how strict the radius needs to be.

Question 3

What happens when it fails?

Signal can drop and addresses can be wrong. Decide in advance how people clock in when the check is not possible, and who reviews the exceptions.

Read next

PlanningConnect

Job and Time Management

From the daily agenda to clock-in and timesheets, all from the app.

See the app →
Download

Timesheet and job-costing report in Excel

A monthly report of hours, travel and expenses by technician, client and job order.

See the report →
Guide

AI analysis of scheduling data

Why the quality of the data you record comes first.

Read the guide →

Questions about GPS clock-in

Short answers about how it works in PlanningConnect.

Does GPS clock-in measure working hours?
No. It records where the person was when they clocked in. The hours come from the contract, the shift and the recorded clock-in times, and the time of a GPS clock-in is the moment the person presses the button.
Can someone clock in outside the radius?
Not with the GPS button: nothing is recorded and the app shows how far away the person is. The normal clock-in is still available, and it is saved without the GPS icon.
Does the app follow people during the day?
No. The position is read only when the person presses the GPS clock-in button, and the browser asks for permission the first time. It is compared once with the address of the planned activity, it is not stored, and the app does not track it afterwards.
When does the GPS button appear?
When the company has set a radius, an activity is selected, and the client of that activity has an address in PlanningPME. Otherwise only the normal clock-in is shown.
Do I need an agreement with employees or unions?
It depends on how the tool is used and on your country. Ask your labour consultant or data protection officer before you switch it on, and in every case tell employees what is checked and why. Contact us if you want to talk it through.

Want to see how clock-in works for your team?